PBS-4 VTK    

  

PBS-4

AUDIO SPECIFICATIONS

INPUT
x3 LINE IN Stereo RCA
x2 Neutrik Combo Jack (Mono)
x1 HDMI IN
x1 USB IN (Loop Back)

OUTPUT
x1 Master Output Stereo RCA (Control Room)
x1 1/4" Headphone Jack


VIDEO SPECIFICATIONS

INPUT
x4 VIDEO IN (Composite RCA)
x1 VGA IN(D-SUB15 pin)
x1 HDMI IN

OUTPUT
x2 MASTER OUT (Composite / USB)
x1 PREVIEW OUT(Composite) 

VIDEO RESOLUTION
Composite: NTSC / PAL
VGA IN (NTSC) : 1024×768 (60Hz)
VGA IN (PAL) : 1024×768 (50Hz)
HDMI IN (NTSC): 720×480 (60Hz) *480p
HDMI IN (PAL) : 720×576(50Hz)*576p 

SAMPLING RATE
4:2:2 (Y:R-Y:B-Y), 8-bit, 13.5 MHz (ITU-R BT.656) 

INPUT/OUTPUT LEVEL
Composite: 1.0 Vp-p
Impedance: 75 ohms 

USB
Class: 2.0
Video Output Resolution: 720x480 (NTSC), 720x576 (PAL)
Audio ADC: 16bit/48kHz


Power Supply   DC-6V 3A (Vestax SDC-6)
Power Consumption  7W (AC100V - 230V)
Dimention    210(W) x 147(D) x 45(H)mm (excluding knobs)
                  210(W) x 147(D) x 54(H)mm (including knobs)
Weight    950g

CAUTION

-In order to target the consumer market, we have removed the frame  synchronizer. Therefore, video noise on the output screen (mainly Composite output) may appear for a moment when switching video source due  to the synchronisation of the video signal. Please be forewarned.
-Driver installation is required for both Windows and Mac.
-Driver Download is here
-HD video images input via HDMI will be down converted to SD quality.
-If connecting a video camera to PBS-4 via the HDMI input, only [NTSC: 480p, PAL: 576p] formats are supported. Ensure that your camera supports these formats, before connecting to PBS-4.
-The input resolution of the VGA input of PBS-4 is fixed to [NTSC: 1024x768 (60Hz), PAL: 1024x768 (50Hz)]. If a source with higher resolution (e.g. laptop output) is connected to this input, the video resolution will be reduced to this value.
-When selecting a video channel that has no input (i.e. not connected to video devices such as cameras or DVD players) it will appear as a blank  screen in your broadcast, and video noise may appear when switching back to other video channels.
-When inputting a HDMI source, a small blank area (black frame) may appear on the side of the screen.
-When inputting a VGA source, a small blank area (black frame) may appear on the side of the screen, or one side of the VGA source may be hidden.
-Depending on the computer, gray lines may be reflected at the top and bottom of the USB output screen.

 

MBC-420  (Microphone)

Image Sensor: 1/4 inch Sharp Color CCD
Resolution: NTSC
Effective Pixels: 512 (H) × 482 (V)
Resolution: 420TVL
Shutter Speed: 1/50 (1/60) -1/100, 000 sec
S / N ratio: 48dB or more
Synchronization method: internal synchronization
Minimum illumination: 1.0Lux/F1.2
Backlight compensation: ONOFF switching function with
Lens Drive Mode: Video drive
Lens Mount type: CS
Video output: BNC
Power: DC12V 1A
Operating temperature: -10 ℃ ~ +50 ℃
Dimensions: 52 (W) × 58 (H) × 60 (d) mm
Weight: 190g
Accessories: power adapter, lens, video cable, tripod, BNC-RCA conversion plug

 

MMM-05 (Video Camera)

Formula: Dynamic Microphone with ON / OFF switch
Directional characteristics: unidirectional
Impedance: 600Ω ± 30% @ 1kHz
Frequency range: 50Hz-16kHz
Sensitivity:-52dB ± 3dB @ 1kHz
Output connector: XLR3 pin (male)
Cord Length: Plug: 4.5m / Φ6.3 standard
Size: 165mm
Weight: 215g
Accessories: microphone cord, soft case

 

MST-05

190mm minimum height 285mm / maximum height: Dimensions
Weight: 510g